Home / Rust / Text editors

rim — Vim-like text editor written in Rust

Rim Rim is an aspiring Vim-like text editor written in Rust. Current state Rim is in an early prototype stage. This means that you can load, edit and
Information
Category: Rust / Text editors
Watchers: 26
Star: 564
Fork: 41
Last update: May 27, 2023
Resource links
https://github.com/mathall/rim

Rim

Rim is an aspiring Vim-like text editor written in Rust.

Screenshot

Current state

Rim is in an early prototype stage. This means that you can load, edit and save files, and hopefully do so relatively comfortably if Vim is what you are used to. In particular some of the simpler commands for insertion and deletion as well as window and buffer navigation has been implemented and bound to the expected key strokes.

Try it out

Simply clone and cargo run.

Note: Some key bindings are for testing purposes only, and some may not work exactly as you would expect them to.

Window navigation

  • <C-w>v/<C-w>s - Split focused window
  • <C-w>c - Close focused window
  • <C-w> h/j/k/l - Move window focus left/down/up/right
  • n/N - Move window focus forward/backward in window order (for testing)
  • (<C->) y/u - Resize focused window (for testing)
  • <C-w>= - Reset window sizes

Buffer navigation

  • h/j/k/l/Arrow keys - Move caret
  • Home/0 - Move caret to start of line
  • End/$ - Move caret to end of line
  • PageUp/<C-b> - Scroll view up by window's length
  • PageDown/<C-f> - Scroll view down by window's length
  • <C-u> - Scroll view up by half of window's length
  • <C-d> - Scroll view down by half of window's length
  • gg - Go to first line
  • G - Go to last line
  • Space in normal mode - move caret forward across line boundaries
  • Backspace in normal mode - move caret backward across line boundaries

Insertion

  • i - Enter insert mode
  • I - Enter insert mode at start of line
  • a - Enter insert mode after caret
  • A - Enter insert mode at end of line
  • o - Enter insert mode at a new line under the current line
  • O - Enter insert mode at a new line above the current line
  • Escape - Exit insert mode

Deletion

  • dd - Delete line
  • D - Delete rest of line
  • C - Delete rest of line and enter insert mode
  • x - Delete character under the cursor
  • X - Delete character behind the cursor
  • r - Replace character under the cursor
  • R - Replace character on the line

Misc / For testing until a proper command line is implemented

  • F1-F4 - Load some buffers
  • :qa<Enter> - Quit
  • :q<Enter> - Close window and quit if it's the last one
  • :w<Enter> - Write buffer to file
4 Open More issues
Closed

Upgraded dependencies and fixed all warnings

I'm not sure about the error messages I inserted. The reason, I inserted them is because send() seems to produce a Result<..> which has to be handled. If you tell me what the error messages should be, I can change them.

opened Jan 24, 2018 by sphinxc0re 23
Closed

Implementation New closing "method"

In vim we have three commands for "exiting":

:qa - quits the program (Cmd::Quit) :clo - close current window, if it isn't the last (Cmd::CloseWindow) :q - close current window, and quits program if it's the last (Not yet implemented?)

I'd like to offer to implement the ":q" in rim. (I'd be starting with something easy) What do you think?

opened Jul 2, 2015 by diogovk 7
Closed

what is this error? How can I solve this? 

rim(github)$ cargo run
    Updating registry `https://github.com/rust-lang/crates.io-index`
    Updating git repository `git://github.com/mathall/termkey-rs.git`
 Downloading gcc v0.1.7
 Downloading libc v0.1.1
 Downloading time v0.1.15
 Downloading rustc-serialize v0.2.11
 Downloading uuid v0.1.9
 Downloading bitflags v0.1.0
   Compiling termkey v0.17.5 (git://github.com/mathall/termkey-rs.git#8394ba8c)
   Compiling rustc-serialize v0.2.11
   Compiling libc v0.1.1
   Compiling bitflags v0.1.0
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19:1: 19:11 error: no_std is experimental
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19 #![no_std]
                                                                                                 ^~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19:1: 19:11 help: add #![feature(no_std)] to the crate attributes to enable
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19 #![no_std]
                                                                                                 ^~~~~~~~~~
error: aborting due to previous error
   Compiling gcc v0.1.7
Build failed, waiting for other jobs to finish...
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541:20: 541:37 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541 impl Encodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541:20: 541:37 error: use of undeclared type name `path::posix::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541 impl Encodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547:20: 547:37 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547 impl Decodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547:20: 547:37 error: use of undeclared type name `path::posix::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547 impl Decodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548:48: 548:65 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548     fn decode<D: Decoder>(d: &mut D) -> Result<path::posix::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548:48: 548:65 error: use of undeclared type name `path::posix::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548     fn decode<D: Decoder>(d: &mut D) -> Result<path::posix::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550:12: 550:34 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550         Ok(path::posix::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550:12: 550:34 error: unresolved name `path::posix::Path::new`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550         Ok(path::posix::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554:20: 554:39 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554 impl Encodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554:20: 554:39 error: use of undeclared type name `path::windows::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554 impl Encodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560:20: 560:39 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560 impl Decodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560:20: 560:39 error: use of undeclared type name `path::windows::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560 impl Decodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561:48: 561:67 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561     fn decode<D: Decoder>(d: &mut D) -> Result<path::windows::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561:48: 561:67 error: use of undeclared type name `path::windows::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561     fn decode<D: Decoder>(d: &mut D) -> Result<path::windows::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563:12: 563:36 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563         Ok(path::windows::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563:12: 563:36 error: unresolved name `path::windows::Path::new`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563         Ok(path::windows::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~~~
error: aborting due to 16 previous errors
Could not compile `libc`.

To learn more, run the command again with --verbose.
(expedia)rim(github)$ v .
(expedia)rim(github)$ cargo run --verbose
       Fresh gcc v0.1.7
   Compiling rustc-serialize v0.2.11
     Running `rustc /Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/lib.rs --crate-name rustc-serialize --crate-type lib -g -C metadata=285c9bed5802d3eb -C extra-filename=-285c9bed5802d3eb --out-dir /Users/yo1/other-code/code-reading/rim/target/deps --emit=dep-info,link -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -Awarnings`
       Fresh bitflags v0.1.0
   Compiling termkey v0.17.5 (git://github.com/mathall/termkey-rs.git#8394ba8c)
     Running `/Users/yo1/other-code/code-reading/rim/target/build/termkey-bd5d741c95aaea0b/build-script-build`
   Compiling libc v0.1.1
     Running `rustc /Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs --crate-name libc --crate-type lib -g --cfg feature="default" --cfg feature="cargo-build" -C metadata=6b537f2898b2a028 -C extra-filename=-6b537f2898b2a028 --out-dir /Users/yo1/other-code/code-reading/rim/target/deps --emit=dep-info,link -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -Awarnings`
   Compiling time v0.1.15
     Running `rustc /Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/time-0.1.15/build.rs --crate-name build-script-build --crate-type bin -C prefer-dynamic -g --out-dir /Users/yo1/other-code/code-reading/rim/target/build/time-2215e3ac75eaa2c7 --emit=dep-info,link -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps --extern gcc=/Users/yo1/other-code/code-reading/rim/target/deps/libgcc-3361713823cacea0.rlib -Awarnings`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19:1: 19:11 error: no_std is experimental
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19 #![no_std]
                                                                                                 ^~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19:1: 19:11 help: add #![feature(no_std)] to the crate attributes to enable
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs:19 #![no_std]
                                                                                                 ^~~~~~~~~~
error: aborting due to previous error
Build failed, waiting for other jobs to finish...
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541:20: 541:37 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541 impl Encodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541:20: 541:37 error: use of undeclared type name `path::posix::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:541 impl Encodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547:20: 547:37 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547 impl Decodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547:20: 547:37 error: use of undeclared type name `path::posix::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:547 impl Decodable for path::posix::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548:48: 548:65 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548     fn decode<D: Decoder>(d: &mut D) -> Result<path::posix::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548:48: 548:65 error: use of undeclared type name `path::posix::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:548     fn decode<D: Decoder>(d: &mut D) -> Result<path::posix::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550:12: 550:34 error: failed to resolve. Could not find `posix` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550         Ok(path::posix::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550:12: 550:34 error: unresolved name `path::posix::Path::new`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:550         Ok(path::posix::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554:20: 554:39 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554 impl Encodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554:20: 554:39 error: use of undeclared type name `path::windows::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:554 impl Encodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560:20: 560:39 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560 impl Decodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560:20: 560:39 error: use of undeclared type name `path::windows::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:560 impl Decodable for path::windows::Path {
                                                                                                                          ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561:48: 561:67 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561     fn decode<D: Decoder>(d: &mut D) -> Result<path::windows::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561:48: 561:67 error: use of undeclared type name `path::windows::Path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:561     fn decode<D: Decoder>(d: &mut D) -> Result<path::windows::Path, D::Error> {
                                                                                                                                                      ^~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563:12: 563:36 error: failed to resolve. Could not find `windows` in `std::path`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563         Ok(path::windows::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~~~
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563:12: 563:36 error: unresolved name `path::windows::Path::new`
/Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/rustc-serialize-0.2.11/src/serialize.rs:563         Ok(path::windows::Path::new(bytes))
                                                                                                                  ^~~~~~~~~~~~~~~~~~~~~~~~
error: aborting due to 16 previous errors
Could not compile `libc`.

Caused by:
  Process didn't exit successfully: `rustc /Users/yo1/.cargo/registry/src/github.com-1ecc6299db9ec823/libc-0.1.1/rust/src/liblibc/lib.rs --crate-name libc --crate-type lib -g --cfg feature="default" --cfg feature="cargo-build" -C metadata=6b537f2898b2a028 -C extra-filename=-6b537f2898b2a028 --out-dir /Users/yo1/other-code/code-reading/rim/target/deps --emit=dep-info,link -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -L dependency=/Users/yo1/other-code/code-reading/rim/target/deps -Awarnings` (status=101)
opened Feb 18, 2015 by thisiswei 7
Closed

Allows opening file from command line

Also adds options --help and --version

Please tell me your thoughts.

opened Jul 7, 2015 by diogovk 5
Closed

Project don't run with cargo

This project don't run or compile with cargo (cargo 0.15.0-nightly (298a012 2016-12-20) ) and rustc (rustc 1.14.0 (e8a012324 2016-12-16) )

We receive that message below:

    Compiling rim v0.0.1 (file:///home/flavio/bin/rim)
error[E0554]: #[feature] may not be used on the stable release channel
 --> src/rim.rs:9:1
  |
9 | #![feature(mpsc_select)]
  | ^^^^^^^^^^^^^^^^^^^^^^^^

error[E0554]: #[feature] may not be used on the stable release channel
  --> src/rim.rs:10:1
   |
10 | #![feature(slice_patterns)]
   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^

error: aborting due to 2 previous errors

error: Could not compile `rim`.

To learn more, run the command again with --verbose.
opened Jan 16, 2017 by flaviogranato 4
Closed

Add TravisCI integration to test the build with rust nightly

opened May 25, 2015 by thachmai 3
Open

Can't run 

Caused by:
  process didn't exit successfully: `/Users/leontepe/sources/.archive/rim/target/debug/build/termkey-rs-0245bc43e5423da8/build-script-build` (exit status: 101)
  --- stderr
  Cloning into 'termkey-c/v0.17'...
  fatal: remote error:
    The unauthenticated git protocol on port 9418 is no longer supported.
  Please see https://github.blog/2021-09-01-improving-git-protocol-security-github/ for more information.
  make: *** termkey-c/v0.17: No such file or directory.  Stop.
  thread 'main' panicked at 'assertion failed: Command::new(\"./build_termkey.sh\").arg(git_ref).status().unwrap().success()', /Users/leontepe/.cargo/git/checkouts/termkey-rs-f0bd9c68d915c604/736a015/build.rs:5:5

I already tried changing the termkey-rs dep from git:// to https:// in the Cargo.toml, but that didn't fix it?

opened Mar 19, 2022 by ghost 0
Open

cargo run abort, '/usr/local/lib/libtermkey.1.dylib' (no such file)

❯ cargo run Finished dev [unoptimized + debuginfo] target(s) in 0.13s Runningtarget/debug/rimdyld[58957]: Library not loaded: /usr/local/lib/libtermkey.1.dylib Referenced from: /Users/chenzhang/data/rim/target/debug/rim Reason: tried: '/usr/local/lib/libtermkey.1.dylib' (no such file), '/Users/chenzhang/data/rim/target/debug/deps/libtermkey.1.dylib' (no such file), '/Users/chenzhang/data/rim/target/debug/libtermkey.1.dylib' (no such file), '/Users/chenzhang/.rustup/toolchains/stable-x86_64-apple-darwin/lib/rustlib/x86_64-apple-darwin/lib/libtermkey.1.dylib' (no such file), '/Users/chenzhang/.rustup/toolchains/stable-x86_64-apple-darwin/lib/libtermkey.1.dylib' (no such file), '/Users/chenzhang/lib/libtermkey.1.dylib' (no such file), '/usr/lib/libtermkey.1.dylib' (no such file) [1] 58957 abort cargo run After i clone this repo, and run 'cargo run', a dependency problem acurred, what should i do ?

opened Feb 10, 2022 by CheungChan 0
Open

Msgpack RPC interface

Any plans on implementing Neovim's msgpack interface? It would be quite interesting to have plugins that are compatible with both Rim and Neovim.

opened Dec 1, 2015 by sebnow 1
Open

rim exits without error message when saving to file without permission

If you open a file which your user has read permission, but no write permission, and then try to save it (:w) rim exists with code 101 and no explanation.

I think rim should show a message to the user and should not exit when failing to write in file.

In the case of vim there's a line at the bottom that's "reserved" for showing warnings and erros, as well as the "vim prompt". I think I'd be nice for rim to have this "message bar" as well.

What do you think?

opened Jul 13, 2015 by diogovk 8

Contents

    liuchengxu :herb: Another elegant statusline for vim
    Shougo Commands for ddu.vim
    c9s Operating Kubernetes Cluster from Vim, in Vim
    Shougo Zsh completion for ddc.vim
    lepture A markdown editor. http://lab.lepture.com/editor/
    rhysd Vim editor ported to WebAssembly
    rhysd Vim editor embedded in your React web application
    ilai-deutel A text editor in ≤1024 lines of code, written in Rust
    fanglingsu Vimb - the vim like browser is a webkit based web browser that behaves like the vimperator plugin for the firefox and usage paradigms from the great editor vim. The goal of vimb is to build a completely keyboard-driven, efficient and pleasurable browsing-experience.
    pH-7 :memo: PHNotepad is a simple Java text/code editor (notepad) written in Java. It has also nice features such as Search tool, Find/Replace text/code, Auto completion, Nice Image Buttons for better UX, etc.
    rhysd C Compiler written in Vim script
    xi-editor A modern editor with a backend written in Rust.
    xojs Vim plugin for XO
    yann-yinn Find your Vim commands faster : An interactive cheat sheet for vim. (Site might be slow to start, please wait )
    skanehira Markdown preview plugin for Vim
    dofy Vim 实操教程（Learning Vim）Vim practical tutorial.
    iqxd mine sweeping game in vim and neovim
    beauwilliams Simple AutoWrite Plugin compatible with most if not all vim distributions (Vim/Neovim)
    GrenderG tte (tiny text editor) is a terminal based text editor written in C from scratch.
    biraj21 Texterm Text Editor - A very minimal & simple text editor written in C with only Standard Library.
    rhysd Kiro is a terminal UTF-8 text editor written in Rust 📝🦀
    Share this repo

    Related Repos


    Text editors
    132
    kyun | The worst text editor (yet)
    file-acomplaint ( ¯ ꒳ ¯)>　Hewwo! Hav yu had this befowe? I want to write cute text, but iwt isn't cute enough?????(๑`^´๑)ﾌﾟﾝﾌﾟﾝ ( ¯ ꒳ ¯)>　Then I hav a sowution for yu
     
    Text editors
    132
    kyun | The worst text editor (yet)
    file-acomplaint ( ¯ ꒳ ¯)>　Hewwo! Hav yu had this befowe? I want to write cute text, but iwt isn't cute enough?????(๑`^´๑)ﾌﾟﾝﾌﾟﾝ ( ¯ ꒳ ¯)>　Then I hav a sowution for yu
     
    Text editors
    31
    Pipewire graph editor written in Rust. WIP⚠️
    Ax9D pw-viz A simple and elegant, pipewire graph editor This is still a WIP, node layouting is kinda jank at the moment. Installation A compiled binary is
     
    Text editors
    6
    Simple system monitoring app that runs on terminal. Made purely with Rust.
    N1kO23 What is it? RCTOP is a simple WIP system monitoring app that runs purely on terminal and doesn't feature GUI. One can compare it to htop, but more str
     
    Text editors
    17
    full text search manpages
    epilys buke full text search manpages cargo run --release -- --build builds an sqlite3 database out of all manpages in your $MANPATH cargo run --release -- "
     
    Text editors
    2.7k
    Rustpad is an efficient and minimal open-source collaborative text editor
    ekzhang Efficient and minimal collaborative code editor, self-hosted, no database required
     
    Text editors
    22
    A tray icon to uwuify your text
    Olaren15 uwu-tray fastest uwuifier in the west... now in your system tray for even faster uwufication! FAQ Which platforms are supported? Windows Linux MacOS H
     
    Text editors
    29
    discord bot for uwuifying text
    yaahc uwubot This crate defines a discord bot using serenity for uwuifying text via uwuify. Installation You can install uwubot from source or from crates.i
     
    Text editors
    621
    fastest text uwuifier in the west
    Daniel-Liu-c0deb0t uwuify fastest text uwuifier in the west transforms Hey... I think I really love you. Do you want a headpat? into hey... i think i w-weawwy wuv you.
     
    Text editors
    55
    Text Expression Runner – Readable and easy to use text expressions
    schulke-214 ter - Text Expression Runner ter is a cli to run text expressions and perform basic text operations such as filtering, ignoring and replacing on the c
     
    Text editors
    21
    Marko Editor is a simple WYSIWYG editor for note taking.
    mmMike Marko Editor is a simple WYSIWYG editor for note taking written in Rust and GTK 4. It uses Markdown as storage format and can read simple Markdown files. However, the main focus of Marko Editor is WYSIWYG note taking and not being a 100% compliant Markdown editor.
     
    Text editors
    22
    Ultron is a web base text editor written in rust
    ivanceras Ultron is a web based monospace text-editor with syntax highlighting, completely written in rust.
     
    Text editors
    22
    Scribble is an experimental terminal text-editor written in Rust
    ryangjchandler Scribble is an experimental terminal text-editor written in Rust. This project is being used as a way of improving my Rust skills and playing around with new ideas and concepts.
     
    Text editors
    23
    pwintln uwu
    lf- pwintln this is campbell's fault you can upgrade your rust println functions across your entire codebase to all be pwintln, which will automatically u
     
    Text editors
    690
    Kiro is a terminal UTF-8 text editor written in Rust 📝🦀
    rhysd Kiro is a tiny UTF-8 text editor on terminal written in Rust. Kiro was started as a Rust port of awesome minimal text editor kilo and has grown with various extensions & improvements.