The latest rofi update was released today/yesterday and has broken the UI of all rofi menus in bspwm. Screenshot attached.

I get the following error when trying to update the system:

:: File /var/cache/pacman/pkg/grub-silent-2.04-4-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (checksum)). Do you want to delete it? [Y/n] n :: File /var/cache/pacman/pkg/plymouth-0.9.5-7-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (checksum)). Do you want to delete it? [Y/n] n :: File /var/cache/pacman/pkg/polybar-3.5.5-2-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (checksum)). Do you want to delete it? [Y/n] n :: File /var/cache/pacman/pkg/yay-10.2.2-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (checksum)). Do you want to delete it? [Y/n] n error: failed to commit transaction (invalid or corrupted package (checksum)) Errors occurred, no packages were upgraded.

Hello, i tested the latest Version archcraft-2020.09.01-x86_64.iso in 2 Vms and on one Notebook(HP Elitebook 8760w) and the laucher will not come after booting in live mode i can switch to another terminal everything seems working fine but i can press Window or Alt+F1 and nothing happends.

Thanks for help.

Polybar icons have stopped working. I also ran the fix_modules script and it didn't work

Detailed Description

As i boot into the login screen on the newest version of archcraft, for the first time i type in the password ("liveuser") and it accepts it, starts loading the desktop, loads a part of the desktop background and then immediately cycles me back to the loading screen, asking for the password again, so i cannot even boot into the liveversion to install archcraft

Expected Behavior

Cycles you through login into a few ms of wallpaper and then goes back to login asking for the password again

Current Behavior

Endless login loop

Steps to Reproduce

1. download the latest archcraft iso and burn it onto a media (USB used in this case)
2. select the media in the boot order
3. boot it up
4. input the password
5. u get a screen flash
6. asks for a password again

Context

• ISO Version: archcraft-2022.02.02-x86_64
• System Specs: AMD Fx 9590, 8gb RAM
• Graphics Card: NVIDIA GTX 1050

Prerequisites

Detailed Description

Whenever my screen blanks due to inactivity, once it wakes up again some artifacts are shown on the screen (mainly the desktop).

Expected Behavior

No artifacts shown after the screen wakes up from sleep.

Current Behavior

Artifacts after the screen goes blank or pc has been unlocked.

Steps to Reproduce

1. Wait the set time until your screen blanks after some period.
2. Move the mouse to wake up the PC.
3. Artifacts will be shown on the desktop.

Context

Please provide any relevant information about your setup. This is important in case the issue is not reproducible except for under certain conditions.

• ISO Version: archcraft-2022.04.07-x86_64
• System Specs: Ryzen 5 3600.
• Graphics Card: AMD 5600 XT

Note: Attached is an image that shows the artifacts, it only affects the desktop, not any other windows that are on top of it.

I have downloaded the latest version of archcraft through torrent but when installing it the bootloader stays at the logo or simply does not load

Steps to Play

1. HP Zbook 15 g2
2. latest system version
3. any boot method
4. UEFI with CSM or Legacy mode

##Context ISO: archcraft-2022.04.07 CPU: Intel i7-4710MQ (8) @ 3.500GHz GPU: NVIDIA Quadro K2100M RAM: 24 GB

Detailed Description

I installed archcraft today and found that i can't really browse anything , the internet speed is really bad whereas i have an ethernet plugged in and in terminal i can average 6mbps . In any other internet related apps the speed is 7kbps at max. I have tried wifi but the result is same i have not touched any internet related stuff in my install it is currently completely fresh. I have used windows and manjaro the day before and both had no internet issues whatsoever.

Expected Behavior

Usable Internet in browser and internet applications.

Current Behaviour

Terryfyingly slow internet speed only in internet applications such as firefox, discord etc.

Steps to Reproduce

1. Open firefox
2. Open any website.
3. 4kbps internet is presented to me

Context

This is my inxi -Fxza output

System:
  Kernel: 5.17.1-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-linux
    root=UUID=4981d7e6-2041-4491-9449-dc87db5a1105 rw quiet splash
    resume=UUID=0f564f67-a29e-4639-95f6-45a4e80918a6
    vt.global_cursor_default=0 loglevel=2 rd.systemd.show_status=false
    rd.udev.log-priority=3 sysrq_always_enabled=1
  Desktop: bspwm v: 0.9.10 info: polybar vt: 1 dm: SDDM Distro: Archcraft
    base: Arch Linux
Machine:
  Type: Desktop System: Dell product: OptiPlex 790 v: 01
    serial: <superuser required> Chassis: type: 15 serial: <superuser required>
  Mobo: Dell model: 0D28YY v: A02 serial: <superuser required> BIOS: Dell
    v: A22 date: 07/03/2018
CPU:
  Info: model: Intel Core i5-2300 bits: 64 type: MCP arch: Sandy Bridge
    family: 6 model-id: 0x2A (42) stepping: 7 microcode: 0x2D
  Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
    desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
    desc: 1x6 MiB
  Speed (MHz): avg: 1596 min/max: 1600/3100 scaling: driver: intel_cpufreq
    governor: schedutil cores: 1: 1596 2: 1596 3: 1596 4: 1596 bogomips: 22359
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
  Type: mds
    status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: disabled, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
    vendor: Dell driver: i915 v: kernel ports: active: VGA-1
    empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:0102 class-ID: 0300
  Device-2: Jieli USB PHY 2.0 type: USB driver: snd-usb-audio,uvcvideo
    bus-ID: 2-1.4:4 chip-ID: 1224:2a25 class-ID: 0102
  Display: x11 server: X.Org v: 1.21.1.3 compositor: Picom v: git-c4107
    driver: X: loaded: intel unloaded: fbdev,modesetting,vesa gpu: i915
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: VGA-1 mapped: VGA1 model: Dell E1914H serial: <filter>
    built: 2013 res: 1366x768 hz: 60 dpi: 85 gamma: 1.2
    size: 410x230mm (16.14x9.06") diag: 470mm (18.5") ratio: 16:9 modes:
    max: 1366x768 min: 720x400
  Message: Unable to show GL data. Required tool glxinfo missing.
Audio:
  Device-1: Intel 6 Series/C200 Series Family High Definition Audio
    vendor: Dell driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
    chip-ID: 8086:1c20 class-ID: 0403
  Device-2: Jieli USB PHY 2.0 type: USB driver: snd-usb-audio,uvcvideo
    bus-ID: 2-1.4:4 chip-ID: 1224:2a25 class-ID: 0102
  Sound Server-1: ALSA v: k5.17.1-arch1-1 running: yes
  Sound Server-2: PulseAudio v: 15.0 running: yes
  Sound Server-3: PipeWire v: 0.3.49 running: no
Network:
  Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e
    v: kernel port: 3080 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
  IF: eno1 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 465.76 GiB used: 6.33 GiB (1.4%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3500312CS
    size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s
    type: HDD rpm: 5900 serial: <filter> rev: SC13 scheme: MBR
Partition:
  ID-1: / raw-size: 457.6 GiB size: 449.35 GiB (98.20%) used: 6.32 GiB (1.4%)
    fs: ext4 dev: /dev/sda1 maj-min: 8:1
Swap:
  Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 8.16 GiB used: 6.8 MiB (0.1%)
    priority: -2 dev: /dev/sda2 maj-min: 8:2
Sensors:
  System Temperatures: cpu: 46.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 209 Uptime: 1h 14m wakeups: 0 Memory: 3.71 GiB
  used: 2.09 GiB (56.3%) Init: systemd v: 250 target: graphical.target
  tool: systemctl Compilers: gcc: 11.2.0 Packages: pacman: 907 lib: 216
  Shell: Zsh v: 5.8.1 running-in: alacritty inxi: 3.3.15```

Feature request

Tokyonight or catpuccin theme for bspwm?

https://github.com/folke/tokyonight.nvim?msclkid=63038ac0c16e11ecb8bfdcdf2fee4bbc https://github.com/catppuccin/catppuccin?msclkid=5b5c18b7c16e11ecaecfecb5baf24f36

• [x] This issue concerns upgrading from Feb. to Apr. release ~~I am using the latest version~~
• [x] I checked the documentation and found no answer
• [x] I checked to make sure that this issue has not already been filed
• [x] I'm reporting the issue to the correct repository

Detailed Description

Hello, thanks for such a wonderful, beautiful, and convenient distro!

I have an installation from the February release ISO and I'd like to upgrade to the latest. From googling, it seems like it is recommended to reinstall completely from the new ISO. Is there any way to avoid this? I have a lot of data I don't want to lose. Or is it possible to reinstall from ISO without losing data from, e.g., ~/Documents or ~/Downloads?

I'd appreciate some help, or a link to a resource that can help me. Thanks again. If this isn't the right repo please just lemme know and I'll close and reopen on the right one. Or if GitHub isn't the right place to ask this at all, then please tell me where is better. Thank you!

Hello. I tried to remove polybar because I prefer tint2 put it came back after system update. It seems to be integrate to archcraft-openbox. Please how to remove it without breaking everything ?